2
1
NU747_1_G1-FRA.qxd 17/02/05 9:24 Page 1.72
BC85 - NU747-1
C:\Documentum\Checkout\NU747_1_T1-ENG.win 3/3/2005 11:54
-page78
1.72
TRIP COMPUTER AND WARNING SYSTEM (continued)
Trip mileage reset buttons 1 and 2
To rest the trip mileometer to zero,
the display selected should show
“trip mileometer”;pressandhold
down key 1 or 2 or keys 1 and 2
together.
Journey parameter reset buttons
1 and 2
With one of the trip parameters
selected on the display, press button
1 or 2 until the display is reset.
Interpreting some of the values
displayed after resetting
The values showing average fuel
consumption, range and average
speed will become more stable and
reliable the further you travel since
thelasttimetheresetkeywas
pressed.
For the first few miles after pressing
the reset key you may notice:
• that the range increases as you
travel.
This is normal, average fuel
consumption may decrease
when:
- the vehicle stops accelerating,
- the engine reaches its operating
temperature (engine cold when
reset key pressed),
-whenyoudrivefromabuiltup
area on to the open road.
• that the average fuel consumption
increases when the vehicle is
stationary with the engine idling.
This is normal since the computer
takes account of fuel used during
idling.
Automatic resetting of the
journey parameters
A reset is automatic when the
maximum value for any of the
parameters is exceeded.
To Next Page
Loading...
