2.40
ENG_UD80663_4
Avertisseur de perte de pression des pneumatiques (BJA - Renault)
– briefly press the 3 or 4 switch to
reach the “Tyre pressure init. long
press” page;
– press and hold the 5 OK switch to
launch the reset.
Hold down the 5 switch until the
“Operation completed” message ap-
pears. You can now drive.
TYRE PRESSURE LOSS WARNING (3/6)
Resetting procedure
Ignition on, vehicle stopped:
– for vehicles fitted with a type A or C
instrument panel ➥ 1.77, repeat-
edly tap switch 6 as many times as
necessary to reach the “Vehicle” tab
;
– for vehicles fitted with a type B in-
strument panel, tap the switch 6 to
reach the 7 area of the instrument
panel;
3
45
6
If the vehicle is equipped with a nav-
igation system, the resetting proce-
dure may also be carried out using
the multimedia screen: please see
the equipment instructions.
B
7
Tyre pressure
init. long press
To Next Page
Loading...
