1.13
FRONT SEATS (1/2)
To move forwards or
backwards
Lift bar 1 to release. Release the bar
once the seat is in the correct position
and ensure that the seat is fully locked
into position.
To raise or lower the driver’s
seat surface
Depending on the vehicle, lift the lever 2
or 6 or manoeuvre the handle 4, adjust
the seat base to the desired height,
then release the lever.
To tilt the seatback
Depending on the vehicle, move the
control knob 3 or handle 5 and tilt the
seatback to the desired position.
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
We would advise you not to recline
the seatbacks too far to ensure that
the effectiveness of the seat belts is
not reduced.
Make sure that the seatbacks are
correctly locked in place.
Nothing should be placed on the
floor (area in front of driver) as such
objects may slide under the pedal
during braking manoeuvres, thus
obstructing its use.
1
3
1
2
6
5
4
5
To Next Page
Loading...
