5.16
The bulbs detailed below can be re-
placed. However, we recommend that
these be replaced by an approved
dealer if this proves difficult.
Dipped beam headlights
Remove cover A.
Unclip bulb 4 by pressing connector 3
downwards to release the bulb from
clips 2 and 1.
The bulbs are under pres-
sure and can break when
replaced.
Risk of injury.
FRONT LIGHTS: changing bulbs (1/4)
Do not touch the bulb glass. Hold it
by its base.
It is essential to use anti-UV bulbs so
as not to damage the plastic on the
headlights.
Remove bulb 4 from connector 3.
Bulb type: H7
Once the bulb has been replaced, be
sure to correctly reposition lug 5 in
notch 6, then refit cover A.
A
1
2
3
4
3
4
5
6
To Next Page
Loading...
