1.66
Examples of positions for adjusting control A according to the load
Control A
3 positions
Control A
4 positions
4x2
4x4
4x2 4x4
Driver alone or with front passenger 0 0 0
Driver with one front passenger and
one rear passenger
0--
Driver with one front passenger and
two rear passengers
1--
Driver with one front passenger and
three rear passengers
111
Driver with one front passenger,
three rear passengers and luggage
232
Driver only and luggage 3 4 3
The control A is used to adjust the
height of the headlight beams accord-
ing to the load.
Turn control A anticlockwise to lower
the beams and clockwise to raise them.
ADJUSTING THE HEADLIGHT BEAM HEIGHT (1/2)
A
To Next Page
Loading...
