5.14
Do not touch the bulb glass. Hold it
by its base.
When the bulb has been changed,
make sure you refit the cover correctly.
Discharge bulb dipped beam
headlights
Bulb type: D1S.
FRONT HEADLIGHTS: changing bulbs (1/5)
Five door version
After opening the bonnet, pull tool A
upwards. Remove the two screws 1
from the headlight using the tool.
Pull the headlight forwards, sliding it in
its rails up to the end stop.
After refitting the light, tighten the
screws 1 and reposition the tool cor-
rectly in its housing.
Direction indicators
Rotate the bulb holder B to unlock it.
Bulb type: PY21W.
Daytime running lights
Remove cover C and unlock bulb
holder 2 by rotating it.
Bulb type: P21W.
Dipped beam headlights D
Halogen dipped beam headlight
Unlock the two springs D, remove
the cover, then unclip the spring 3 to
remove the bulb 4.
Bulb type: H7.
It is essential to use anti U.V. 55W
bulbs so as not to damage the plastic
on the headlights.
1
B C D E
32
4
B
Due to the danger involved
in handling high-voltage de-
vices, this type of bulb must
be replaced by an approved
dealer.
A
To Next Page
Loading...
