1.81
REAR SCREEN WASH, WIPE
1
3
Check the condition of the wiper
blades. You are responsible for their
service life:
– they must remain clean: clean
the blades, windscreen and
rear screen regularly with soapy
water;
– do not use them when the wind-
screen or rear screen are dry;
– free them from the windscreen or
rear screen when they have not
been used for a long time.
In all cases, replace them as soon
as they begin to lose efficiency: ap-
proximately once a year.
Before using the rear wiper, check
that no object obstructs the travel of
the blade.
Do not use the wiper arm to open or
close the tailgate.
p
Rear screen wash/wipe
With the ignition on, push
stalk 1.
Rear screen wiping in reverse
gear
To activate this function, refer to
“Vehicle settings customisation menu”
in Section 1.
Y
Rear screen wiper
With the ignition on, turn ring 2
on stalk 1 to align the symbol with
mark 3 then release it.
To stop the operation, pivot ring 2 again.
Wiping frequency varies with vehicle
speed.
2
1
3
2
To Next Page
Loading...
