6.2
VEHICLE IDENTIFICATION PLATES (1/2)
A
B
A
1
2
3
4
5
6
7
8
9
10
12
13
11
The information shown on the ve-
hicle identification plate should be
quoted on all correspondence or
orders.
The presence and location of the in-
formation depends on the vehicle.
Vehicle identification plate A
1 Vehicle type and chassis number.
Depending on the vehicle, this in-
formation is also given on mark-
ing B.
2 MMAC (Maximum permissible all-up
weight).
3 GTW (Gross train weight – vehicle
fully loaded, with trailer).
4 MMTA (Maximum permissible
weight) front axle.
5 Maximum permissible weight on rear
axle.
6 Technical specifications of vehicle.
7 Paint reference.
8 Equipment level.
9 Vehicle type.
10 Trim code.
11 Additional equipment specification.
12 Production number.
13 Interior trim code.
Depending on the vehicle, there are
2 types of plate. In case of another
type, you can see it on the next
page.
To Next Page
Loading...
