1.32
CHILD SAFETY: choosing a child and baby seat mounting (2/2)
The ISOFIX anchorage
points have been exclu-
sively designed for child
seats with the ISOFIX
system. Never fit a different type of
child seat, seat belt or other objects
to these anchorage points.
Check that nothing is obstructing
the anchorage points.
If your vehicle has been involved in
a road accident, have the ISOFIX
anchorage points checked and re-
place your child seat.
The third ring is used to attach the
upper strap on some child seats.
Pass the belt between the seatback
and the rear parcel shelf (to release
the bench seat: refer to Section 3 “Rear
bench seat”). Attach the hook to one
of the rings 3 in the luggage compart-
ment.
Pull the belt so that the back of the child
seat comes into contact with the vehicle
seatback.
The two rings 1 are located between
the seatback and the seat base of the
seat and are identified by a marking.
To ensure your child seat can be easily
fitted and locked on rings 1, use access
guides 2 on the child seat.
1
2
3
To Next Page
Loading...
