EasyManua.ls Logo

Renault FLUENCE - Page 90

Renault FLUENCE
244 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.84
Running out of fuel on diesel
versions
Vehicles with priming bulb 1
After a breakdown caused by com-
pletely running out of fuel, the system
must be reprimed before the engine is
restarted:
Fill the tank with at least 8 litres of
diesel fuel.
Press priming bulb 1 several times.
The engine can now be restarted. If the
engine does not start after several at-
tempts, contact an approved Dealer.
1
No modifications what-
soever are permitted on
any part of the fuel supply
system (computers, wiring,
fuel circuit, injector, protection
covers, etc.) as this may be danger-
ous (such work must be undertaken
by qualified Network personnel).
FUEL TANK (3/3)
Vehicles without priming bulb 1
Insert the RENAULT card into the card
reader. Press the start button 2 with-
out pressing any of the pedals. Wait a
few minutes before starting. This will
enable the fuel circuit to be primed. If
the engine does not start, repeat the
procedure.
The engine may be hot-
when working in close prox-
imity. In addition, the engine
cooling fan may come on at
any moment.
Risk of injury.
2

Table of Contents

Other manuals for Renault FLUENCE

Related product manuals