1
2
1.0-1.2
1
2
1.2 16V
1
2
1.0 16V-1.2 16V
1
2
1.4 16V
NU701-5_fra_G4.qxd 31/03/04 10:42 Page 4.05
x76 - KANGOO NU 701-5
C:\Documentum\Checkout\NU701_5_T4-ENG.win 18/6/2004 16:52
-page5
4.05
ENGINE OIL LEVEL (continued)
Topping up/filling
The vehicle must be parked on level
ground and the engine should be
cold (for instance, before the engine
is started up for the first time in the
day).
Special note for 1.2 version
Unclip the dipstick to remove it. Do
not forget to refit the clip when
replacing the dipstick.
- Unscrew the filler cap 1.
- Top up the level. (For your
information, the capacity between
the minimum and maximum
reading on the dipstick 2 is
between 1.5 and 2 litres
depending on the engine.)
- Wait for approximately two
minutes to allow the oil to flow
into the engine.
- Check the level using the dipstick
2 (as explained above).
Do not exceed the “max” level and
donotforgettorefitcap1.
To Next Page
Loading...
