electric beam height adjustment ...........(up to the end of the DU)
see-me-home lighting ...........................(up to the end of the DU)
lights:
adjusting .........................................(up to the end of the DU)
lights
adjustment ......................................(up to the end of the DU)
signals and lights ..................................(up to the end of the DU)
headlight beam adjustment ..................(up to the end of the DU)
1.85
ENG_UD53416_2
Réglage électrique de la hauteur des faisceaux (X10 - Renault)
For manual settings
Examples of positions for adjusting control A according to the load
0 Driver alone or with front passenger
1
Driver with one front passenger and two or three rear
passengers
2
Driver with one front passenger, three rear passengers and
luggage
2
Driver with luggage or load reaching the maximum
authorised load weight
3
Driver and luggage (reaching the maximum permissible
all-up weight)
4 Do not use
The table below gives some examples. In all cases, adjust control A according to the
vehicle load so that the road can be seen and other drivers are not dazzled.
Headlight beam adjustment
On vehicles fitted with this function,
control A allows you to adjust the height
of the beams according to the load.
Turn control A downwards to lower the
headlights and upwards to raise them.
For vehicles not fitted with control A,
adjustment is automatic.
hEADligh T BEAm ADJUSTmENT
A
If driving on the left in a left-hand drive vehicle (or vice versa), drivers must have
the lights adjusted by an authorised dealer for the duration of the trip.
To Next Page
Loading...
