R20UT0930EJ0400 Rev.4.00 Page 1 of 7
Oct 03, 2016
PG-FP5 Flash Memory Programmer
Setup Manual
Thank you for purchasing the PG-FP5 flash memory programmer.
This manual helps you to grasp the overview of preparation and startup for using the PG-FP5 and support for the product,
so please read this manual thoroughly before using the product.
Note the following point before reading this manual.
Access one of the following websites for “Renesas Electronics website” that appears in this manual.
Except for Europe area: https://www.renesas.com/pg_fp5
For Europe area: http://www.renesas.eu/update → Section PG-FP5-EE
The above pages provide the latest versions of the following software and the user’s manual.
• Programming GUI (including USB driver)
• User’s manual
• PG-FP5 parameter file
• Firmware file
• FPGA file
Chapter 1 OVERVIEW .............................................................................................................................. 2
1.1 Checking the Package Contents ....................................................................................................... 2
1.2 User’s Manual ................................................................................................................................... 2
Chapter 2 SETUP ...................................................................................................................................... 3
2.1 Obtaining Software ............................................................................................................................ 3
2.2 Installation ......................................................................................................................................... 3
2.3 System Connection ........................................................................................................................... 3
2.4 PG-FP5 Startup ................................................................................................................................. 4
2.5 Startup of Programming GUI ............................................................................................................. 4
2.6 Check and Update of Version ........................................................................................................... 6
2.7 Completion of Setup .......................................................................................................................... 7
R20UT0930EJ0400
Rev.4.00
Oct 03, 2016