Renesas RA6M3 Series

Rev.1.02 Jun 2020
Renesas RA Family
RA6 Series
User’s Manual
www.renesas.com
All information contained in these materials, including products and product specifications, represents
information on the product at the time of publication and is subject to change by Renesas Electronics
Corp. without notice. Please review the latest information published by Renesas Electronics Corp.
through various means, including the Renesas Electronics Corp. website (http://www.renesas.com).
RA6M3 Group
Evaluation Kit for RA6M3
Microcontroller Group
EK-RA6M
3
Quick Start Guide
Quick Start Guide

Renesas RA6M3 Series Specifications

General

Maximum Clock Frequency	120 MHz
Flash Memory	512 KB to 1 MB
RAM/SRAM	128 KB to 256 KB
Operating Voltage	1.6V to 3.6V
Temperature Range	-40 °C to +105 °C
ADC	12-bit, up to 24 channels
Package	LQFP, BGA
Core	Arm Cortex-M4
DAC	12-bit DAC
Communication Interfaces	USB, SPI, I2C, UART, CAN
GPIO	Up to 100 pins
Timers	PWM
Security Features	AES, TRNG

Summary

Document Introduction

Assumptions and Advisory Notes

User assumptions and advisory notes for kit and software usage.

EK-RA6 M3 Kit Components

Lists components included in the EK-RA6M3 kit.

Quick Start Example Project Overview

Quick Start Project Workflow

Illustrates the operational flow of the Quick Start example project.

Running the Quick Start Example

EK-RA6 M3 Board Power-Up and Connection

Steps to connect and power the EK-RA6M3 board.

Executing the Quick Start Example

Instructions to run the Quick Start example project on the board.

Customizing the Quick Start Project

Software and Tool Installation for Customization

Guide to download and install necessary software and development tools.

Importing the Quick Start Project into IDE

Steps to download and import the example project into the IDE.

Modifying and Building the Quick Start Project

Setting Up Debug Connection for EK-RA6 M3

Running the Modified Quick Start Project

Next Steps and Resources

Website and Support Resources