Renesas RH850 Series User Manual

RH850 Evaluation Platform
RH850 Family SENT
Application Board
Y-RH850-SENT-EXT-BRD-V2
R12UT0014ED0100, Rev.1.00
Dec.21
All information contained in these materials, including products and product specifications,
represents information on the product at the time of publication and is subject to change by
Renesas Electronics Corp. without notice. Please review the latest information published by
Renesas Electronics Corp. through various means, including the Renesas Technology Corp.
website (
http://www.renesas.com).
The newest version of this document can be obtained from the following web location
http://www.renesas.eu/updates?oc=Y-RH850-SENT-EXT-BRD-V2#documentInfo
www.renesas.com
User Manual

Renesas RH850 Series Specifications

General

Core	RH850
Operating Voltage	2.7V to 5.5V
Package Options	LQFP, BGA
Communication Interfaces	CAN, LIN, FlexRay, Ethernet, SPI, I2C, UART
Target Applications	Automotive, Industrial
Timers	Multiple timers
ADC	12-bit, 10-bit
Security Features	Hardware Security Module (HSM)
Safety Features	Memory Protection

Summary

Introduction

Overview

Getting Started

Bill of Materials

Lists all components included in the SENT application board package.

Basic Setup for the SENT Extension Board

Instructions for initial jumper settings on the SENT extension board.

Basic Setup for the RH850/F1KM-S1 Starter Kit

Guidance on connecting and configuring the SENT board with the RH850/F1KM-S1 Starter Kit.

Power Supply

Specifies the required voltage and connection for powering the SENT application board.

Board Description

Connectors

Describes the main and external sensor connectors on the board.

Jumpers

Explains the function and usage of various jumpers for error simulation and configuration.

Buttons

Details the function of the 'Sensor Short Error Button' for error injection.

Test Points

Identifies test points for monitoring SENT communication and ground potential.

Integrated Circuits

Information on the Renesas ZSSC4161D Signal Conditioner IC.

Circuits

Explains the built-in board sensor circuit simulating a Wheatstone Bridge.

Mechanical dimensions

Schematic