Renesas Starter Kit+ User Manual

NOTE: This Quick Start Guide covers installation of the DS-5 DVD.
1. Installation
Do not connect the JLINK LITE ARM debugger module until the software support has been installed.
1. Insert the DVD into your computer’s DVD-ROM drive. The DVD should automatically run the installation program. If
the installer does not start, browse to the DVD root folder and double click on ‘setup.exe’.
2. Windows™ 7/ 8 users may see “User Account Control” dialog box. If applicable, enter the administrator password
and click ‘Yes’.
3. The installer welcome screen will open. Follow the on-screen instructions to install the RSK software. This process
will take several minutes.
Note:
You will be prompted to obtain a product activation code by logging onto the My Renesas website. Please follow the on
screen instructions.
When prompted to specify a different location for installing any of the tools, it is recommended that default entries are
accepted.
The Windows™ driver signing dialog box may be displayed. Please accept the driver to continue.
Select the option to update the ARM DS-5 dll if prompted by the SEGGERJ-LINK DLL Updater.

Renesas Starter Kit+ Specifications

General

Connectivity	USB, Ethernet, CAN, SCI, I2C, SPI
Operating Voltage	3.3V
Operating Temperature	-40°C to +85°C
Development Environment	e2 studio
Debug Interface	JTAG
Programming Interface	JTAG

Summary

Renesas Starter Kit+ Quick Start

Installation

Guide for installing the DS-5 DVD software and drivers for the Renesas Starter Kit+.

Connecting the Hardware and Installing Drivers

Connection Steps

Detailed steps for connecting the JLINK LITE ARM debugger module and the power supply.

Windows Driver Installation

Instructions for installing device drivers on Windows 7/8 for the debugger module.

DS-5 Setup and Sample Code

Adding Sample Code

Steps to add sample code into DS-5, including license activation and workspace setup.

GNU Toolchain Support

Guide to adding GNU toolchain support for DS-5 by installing updates.

Programming and Debugging

Starting the Debugger

Instructions for starting the programming and debugging session within DS-5.

Configuring Debugger

Details on configuring the debugger, including target setup and connection options.

Running the TFT Touchscreen Sample

TFT Touchscreen Program

Steps to run the TFT touchscreen sample program, including debugger and hardware connections.

Further Information and Support

Next Steps

Guidance on reviewing the tutorial code and sample code in the Project Explorer.

Compiler Support

Information about the GNU compiler provided with the starter kit.

User Manuals

Location of user manuals within the Windows 7/Start Menu.

Technical Support

Contact details and web links for technical support and online resources.