Renesas E2 Lite User Manual

4
E2 emulator Lite RTE0T0002LKCE00000R
User’s Manual
All information contained in these materials, including products and product specifications,
represents information on the product at the time of publication and is subject to change by
Renesas Electronics Corporation without notice. Please review the latest information published
by Renesas Electronics Corporation through various means, including the Renesas Electronics
Corporation website (http://www.renesas.com).
Rev.3.00 May 2020
www.renesas.com

Renesas E2 Lite Specifications

General

On-Chip Debugging	Yes
Programming	Yes
Interface	USB
Operating System Support	Windows
Manufacturer	Renesas
Target Devices	Renesas MCUs
Supported Interfaces	JTAG
Debugging Features	Breakpoints
Software Compatibility	Renesas E2 Studio

Summary

1. Outline

1.1 Package Components

Lists the items included in the E2 Lite package.

1.2 System Configuration

Illustrates the connection between the E2 Lite, host machine, and user system.

1.3 PC Interface

Details the USB interface specifications for connecting to the host machine.

1.4 Specifications

Provides technical details including dimensions, weight, operating temperature, and EMC standards.

1.5 Regulatory Compliance Notices

Outlines EU and US regulatory compliance information and certifications.

1.6 E2 Lite Hardware Configuration

Shows the hardware layout of the E2 Lite main unit and its interface cables.

1.7 Names of the Emulator Parts

Identifies and describes the various parts, LEDs, and connectors on the E2 Lite.

1.8 Operating Environment

Specifies recommended conditions for temperature, humidity, and vibration during operation and storage.

2. Setup

2.1 Installing Emulator Software

Instructions for downloading and installing essential software for the E2 Lite.

2.2 Connecting the E2 Lite to the Host Machine

Step-by-step guide for connecting the E2 Lite to the host computer using a USB cable.

2.3 Connecting the E2 Lite to the User System

Procedure for connecting the E2 Lite to the target MCU on the user system.

2.4 Turning the Power On/Off

Details the correct sequence for powering the E2 Lite and user system on and off.

2.5 Connecting System Ground

Explains how to properly connect system ground to prevent damage and ensure safety.

2.6 Hot plug-in

Information on the optional hot-plug adapter for connecting the E2 Lite to a running user system.

3. Troubleshooting (Action in Case of an Error)

3.1 How to Solve a Trouble

Provides solutions for common issues encountered before the emulator debugger starts.

3.2 How to Request Support

Details how to contact technical support and what information to provide.

4. Maintenance and Warranty

4.1 Maintenance

Basic guidelines for cleaning and long-term storage of the E2 Lite.

4.2 Warranty

Information regarding product warranty, lack of repair services, and initial failure replacement.

Appendix A E2 Lite Self-Checking Program (SCP)

A.1 Flow of Self-Checking

Outlines the sequential steps for executing the E2 Lite self-checking program.

A.2 Preparations for Self-Checking

Lists the necessary hardware and software requirements for running the SCP.

A.3 Executing the SCP

Provides detailed instructions and visual examples for running the E2 Lite Self-Checking Program.