Renfert MT plus - Page 8

- 3 - EN
Dry Trimming:
Fault Possible cause Corrective action
Disc buildup. • Models are too wet. • Clean the disc with a brush
under running water or with
plaster solvent (Renfert GO-
2011 Art. No. 2011-0000).
Excessive dust
being blown out
of the grinding
opening.
• Extraction not switched on.
• Insufcientsuction.
• Extractor or dust bag full.
• Extractor hose blocked.
• Switch the extraction on.
• Increase the suction.
• Replace the dust bag.
• Check / clean the hose.