What to do if the Renfert Vacuum Cleaner dust drawer light is on and beeping?
If the dust drawer display lights up and the unit beeps three times, it means the dust drawer needs emptying. The time period for emptying the dust drawer has elapsed and the dust drawer has not yet been emptied, also the emptying of the dust drawer has not been confirmed. Empty the dust drawer and confirm by pressing the indicated key.
Why does my Renfert Vacuum Cleaner make a sound and run a filter cleaning cycle?
The Renfert Vacuum Cleaner runs a filter cleaning cycle and makes a sound after 16 hours of continuous turbine operation without being switched off. To prevent this, always switch the appliance off at the on/off switch at the end of the working day.
What to do if the Renfert Vacuum Cleaner display error lights up and beeps?
If the display error lights up and the unit beeps three times, the difference between the chosen rpm at the handpiece and the stand-by current is too low, so it is not possible to determine the switch-on threshold. Determine the switch-on threshold by increasing the rpm on the handpiece. Alternatively, use the unit in continuous operating mode.
General| Model | SILENT compact |
|---|---|
| Frequency | 50/60 Hz |
| Type | Dust extractor |
| Power Supply | 230 V, 50/60 Hz |
| Air Delivery | 65 l/min |
Explains symbols used in the instructions and on the unit, providing meanings for danger, electrical current, attention, and notes.
Describes the device's design for extracting dry, non-explosive dust in commercial dental settings.
Details unsuitable applications, prohibited materials, and the importance of using authorized spare parts.
Provides general safety information, warnings about operating conditions, and electrical safety.
Covers specific operational safety, handling of hazardous materials, and disposal guidelines.
Identifies and lists the main components and functional elements of the SILENT compact unit.
Details placement, suction tube connection, and electronic device connection for the unit.
Explains switching the unit on, selecting operating modes, and adjusting suction levels.
Details exterior cleaning, dust drawer emptying, and fine filter replacement.
Covers spare parts availability and proper disposal guidelines for the unit.
To Next Page
