To Next PageTo Next Page
Need help?Do you have a question about the Renfert Silent and is the answer not in the manual?
Explains symbols used in the manual and on the unit.
Guide for unpacking, inspecting, and setting up the unit.
Instructions for unpacking, inspecting, and selecting a setup location for the unit.
Identifies and explains the function of each control element on the unit.
Describes how to turn the dust extractor on and off and save operating modes.
Explains how to adjust and view the extraction force levels from 1 to 9.
Explains how the extractor runs continuously regardless of connected devices.
Explains how the extractor starts and stops based on connected devices.
How to adjust the sensitivity for automatic start based on current draw.
Explains the filter change indicator and its function, including acoustic signals.
How to adjust the threshold for the "Change Filter" indicator to prevent false triggers.
How to activate and use the diagnostics mode to check for errors and function.
General safety warnings before performing cleaning or maintenance tasks, including unplugging the unit.
Importance of inspecting and maintaining seals for proper dust extractor function.
Step-by-step instructions for safely removing and replacing the dust bag.
Overview of the different filters and their replacement procedures.
Instructions for replacing the fine particle filter, including anticlockwise removal.
Procedure for replacing the exhaust filter cassette.
Instructions for examining and replacing the electronics filter.
How to safely replace fuses or reset overload switches, emphasizing correct rating.
Step-by-step guide for replacing the suction turbine, including cover removal and wiring.
Instructions for removing and installing the exhaust air labyrinth.
Troubleshooting steps when the unit stops unexpectedly, checking filter status and fuses.
Diagnosing turbine errors during self-test, even when running, checking connections and faults.
Causes and solutions for low extraction power, checking filters, hoses, and settings.
Troubleshooting the "Change Filter" indicator coming on prematurely, checking hose connections and dust fineness.
Explains causes and solutions for dust bag ruptures, related to filter status and adjustment.
Corrective actions for the extractor failing to start or stop correctly with connected devices.
Problems with setting up or adjusting the automatic start feature, signal strength.
Explains brief extraction startup when the unit is switched on, related to activation sensitivity.
Solutions for stiff lock bolts on panels and dust drawer, suggesting cleaning and lubrication.
Describes the intended use and capabilities of the dust extractor in laboratories.
Defines the correct and prohibited materials for extraction, including safety regarding dust types.
Specifies the environmental conditions for safe operation, including temperature and humidity.
Outlines general hazards, warnings, and safety precautions for operating the unit.
Defines who is authorized to operate and service the unit, including minors and pregnant women.
Key preparations before operating the dust extractor.
Instructions for connecting the unit to the power supply, checking voltage compatibility.
How to connect external devices to the unit's power outlet.
Information regarding authorized repair procedures and necessary protective gear.
Guidance on the proper disposal of consumables and the unit itself.
Guidance on proper disposal of used consumables like dust bags and filters.
Instructions for disposing of the entire unit responsibly through authorized recycling.
Specific disposal guidelines for European Union countries regarding electrical units.
Information for German customers regarding unit returns and disposal options.
General| Brand | Renfert |
|---|---|
| Model | Silent |
| Category | Accessories |
| Language | English |
