Renishaw OMP40 - Disclaimer and Legal Notices; Trademarks; Patent Notice

T +44 (0)1453 524524
F +44 (0)1453 524901
E uk@renishaw.com
www.renishaw.com
Renishaw plc
New Mills, Wotton-under-Edge,
Gloucestershire, GL12 8JR
United Kingdom
5. Fully tighten. 6. Fit to spindle.
7. Screw in opposition to adjust
runout <5 µm. Fully tighten to
2.2 Nm (0.49 lbf) when complete
6 Nm
(1.35 lbf)