20
SYSTEM STATUS LED
RMI-Q in “Partnering
mode” with empty
probe location
or
SYSTEM STATUS LED
RMI-Q in “Partnering
mode” with full probe
location
Switch on the RMI-Q
Partnering mode
Partnering mode off
RMI-Q
Deflect the stylus to select
“Partnering mode on”. Ensure
this is done within 60 seconds of
the RMI-Q status LED flashing
green.
RMP60 – RMI-Q partnership
System set-up can be achieved by using Trigger Logic™.
To Next Page
Loading...
