Renkforce RF-IRDAB-RETRO1 - K) Alarm Function

59
k) Alarm Function
Calling alarm conguration
• Press the MENU button (9) or the button (23) on the remote control and use the rotary knob (5) or the arrow
buttons(20),selectthe"ALARM"menuitemandconrmyourselection.
The "ALARM" menu item can also be accessed directly by pressing the button (21).
Setting the alarm
The device offers two alarm times that you can set and use independently of each other. Setting the two alarm times
works identically.
• From the alarm clock menu, select and turn on the desired alarm.
• Now set the alarm time, the alarm tone, the alarm days and the alarm volume.
When you wake up with radio sound, you must select a station from your saved favourites or the station
lists of DAB or FM radio.
• The alarm is now active and set up. You can now leave the menu.
• A corresponding symbol appears in the display (6) when the alarm function is activated.
Switching off the alarm
• When the alarm sounds, you can turn it off by pressing the rotary knob (5) or the OK button (29).
• The alarm is switched off until the next alarm time.
If the alarm is not switched off, it switches off automatically after 30 minutes.
• To completely deactivate the alarm again, navigate to the alarm clock menu and switch off the activated alarm.
• Theexistingcongurationofthealarmisstillretained.