60
l) Sleeptimer
With this function you can switch off the device automatically after an adjustable time, e.g. to fall asleep with music.
• Press the MENU button (9) or the
button (23) on the remote control and use the rotary knob (5) or the arrow
keys(20)toselectthe"SLEEPTIMER"menuitemandconrmyourselection.
The "SLEEP TIMER" menu item can also be accessed directly by pressing the button (22).
• If you activate the sleep timer (a time must be selected), the radio turns off automatically after the selected time.
• You can choose the following times: 15, 30, 45, 60, 90, 120, 150 or 180 minutes.
• After activation, a corresponding symbol appears in the display (6) together with the remaining time until automatic
switch-off.
m) Conguration
Hereyouwillndmoredetailedinformationontheindividualmenuitemsinthe"CONFIGURATION"menu.
• Press the MENU button (9) or the
button (23) on the remote control and use the rotary knob (5) or the
arrowkeys(20)toselectthe"CONFIGURATION"menuitemandconrmyourselection.
"Network"
Here you can add/remove and manage access points (AP) to your network.
Wi-Fi Network
Add/Remove AP
Add AP(Scan): Proceed as described under "Operation/Release"
Remove AP: to remove an existing network access.
AP: [...]: Display of active network access with possibility of change/distance
Signal: ...dBm: Display of Signal Strength
IP [...]: Displaying/changing the IP setting
DNS [...]: Displaying/changing the DNS setting
Only change the settings for IP and DNS if a problem occurs and you know which settings need to be
changed.
To Next Page
Loading...
Need help?
General
