Renogy PHOENIX 200 - Powering Your Devices

For some makes or models of vehicles, the car socket may not operate when the ignition is
turned off. In such cases, please start the engine before recharging your PHOENIX 200 via the
car socket
NOTE
Operating your PHOENIX 200 at high temperatures above 113
(45 ) or at low temperatures
below 32
(0 ) can result in battery performance degradation and service life shortening. For
optimal battery performance and maximum battery life, it is strongly recommended to operate
your PHOENIX 200 at room temperature.
CAUTION
Please disconnect your PHOENIX 200 from the car socket when starting the engine. Electric
surges from the alternator when starting may damage your PHOENIX 200.
CAUTION
The above estimation formulas only apply when the PHOENIX 200 has been fully recharged and
the device does not draw too much power.
NOTE
Operation Time
Electrical shock can occur if the Cigaretter Lighter Plug to 5.5mm DC Adapter Cable is damaged
or frayed. DO NOT use a damaged or frayed cable to recharge your PHOENIX 200.
WARNING
Battery Powered Devices:
Number of Full Charges =
37,800mAh x 0.95
The Battery Capacity of Device (mAh)
DC Powered Devices:
Working Hours =
189Wh x 0.95
The Rated Power of Device (W)
AC Powered Devices:
Working Hours =
189Wh x 0.85
The Rated Power of Device (W)
OPERATING YOUR PHOENIX 200
- 10 -