Renogy PHOENIX 200 - Troubleshooting

Battery high-temperature protection may be triggered when the PHOENIX 200 is operating at
full load. When this is the case, cool down the unit before resuming operation. See TROUBLE-
SHOOTING for more details.
CAUTION
When using the AC outlets of your PHOENIX 200, keep 4 inches of space on either side of the
unit to guarantee efficient heat dissipation of the inverter.
CAUTION
If any of the Ports Status LED Indicators flashes in an unusual way, your PHOENIX 200 may
need special attention. See TROUBLESHOOTING for help.
CAUTION
Some devices that require high current impulse may not be compatible with the PHOENIX 200
even though they do not exceed the power ratings of output ports.
NOTE
When the PHOENIX 200 is powering devices that have high power consumption, the battery
level can drop quickly. In this case, you may not get exactly 189Wh of energy.
NOTE
The PHOENIX 200 can be recharged and deliver DC power to your devices simultaneously.
However, AC power is not available when the PHOENIX 200 is being recharged.
NOTE
MAINTENANCE
Using the LED Flashlight
The LED Flashlights on both sides of the Folding Carrying Handle have four light modes: Bright (100%
brightness), Dim (50% brightness), Flashing, and SOS.
Press the Flashlight On/Off Button to turn on the LED Flashlights, switch light modes, and turn off the LED
Flashlights. You can also long press the Flashlight On/Off Button to turn off the LED Flashlights no matter
what mode are they in.
To prolong the service life of your PHOENIX 200, keep it away from harsh sunlight, water, dust, and dirt. DO
NOT leave your PHOENIX 200 outside under harsh environments.
If possible, keep your PHOENIX 200 connected to a power source when it is not being used and avoid using
large loads when the battery level is low.
To maintain a healthy battery, please recharge your PHOENIX 200 at least once every two months.
Keep your PHOENIX 200 away from corrosives, fire, and heat sources.
If you do not intend to use your PHOENIX 200 frequently, it is strongly recommended to keep its battery level
at around 50% and store it in a clean, dry and well-ventilated environment with temperatures around 77
(25
) and a humidity no higher than 75%.
- 12 -