What to do if charge/discharge over-current protection is triggered in Renogy Battery Pack?
If the Renogy Battery Pack triggers charge/discharge over-current protection due to excessive current flow during charging or discharging, disconnect the battery from the charging source or loads as soon as possible.
What to do if Renogy Battery Pack shuts off due to undervoltage protection?
If the Renogy Battery Pack shuts off due to undervoltage protection because the battery voltage drops below the preset threshold, disconnect the battery from loads and charge the battery with a current greater than 1A as soon as possible.
What to do if Renogy Pro temperature gets too high or low?
If the Renogy Battery Pack experiences high/low temperature protection during operation because the battery temperature exceeds the preset threshold: 1. Disconnect the battery from the charging source or loads. 2. Cool down/warm up the battery. The battery recovers from high/low temperature protection automatically and continues operating.
What to do if short circuit protection is triggered in Renogy Pro?
If the Renogy Battery Pack triggers short circuit protection because a short circuit occurs in the battery: 1. Remove the short circuit as soon as possible. 2. Charge the battery with a current greater than 1A.
What to do if Renogy Pro cuts off charging current due to overvoltage?
If the Renogy Battery Pack cuts off the charging current due to overvoltage protection because the battery voltage exceeds the preset threshold during charging: 1. Disconnect the battery from the charging source. 2. Reduce charge voltage by 0.2V to 0.4V for 6 hours. 3. Attempt to fully charge the battery again with the correct voltage setting. If the problem persists with a lithium iron phosphate compatible charging source and correct voltage setting, repeat the above steps.
How to activate Renogy Pro if it won't activate with a charge greater than 1A?
If the Renogy Battery Pack is unable to be activated with a charge/discharge current greater than 1A due to severe battery overdischarge (caused by self-discharge or parasitic loads), revive the battery with a battery charger or charge controller featuring lithium battery activation or force charging.
General| Brand | Renogy |
|---|---|
| Model | Pro Series |
| Category | Battery Pack |
| Language | English |
To Next Page
