Renogy Rover 60A - Displayed Parameters and Error Codes

22
Screen
Displayed
Item/Parameter
Description
1
Chag State: Idle
Battery Voltage
Solar Panel Voltage
Charging Current
BatVol: 11.6V
PvVol: 0V
ChagCrt
LoadState: OFF Load in “ON” or “OFF”
Load current
Remaining battery capacity
Controller Temperature
LoadCrt: 0A
BatSoc: 100%
Dev Temp: 27°C
ChagPower: 0W Current Wattage
Load Wattage
The current day’s minimum battery voltage
The current day’s maximum battery voltage
LoadPower: 0W
MinBatVol: 12.5V
MaxBatVol: 13.5V
Fault: NULL
2
3
4
Charging State Indicators:
“Idle”, no charging
“MPPT”, MPPT charging
“EQU”, Equalization charging
“BST”, Boost charging
“FLT”, Float charging
“LIMIT”, current-limited charging
Controller Error Codes:
“BAT-LDV” over-discharge
“BAT-OVD” over-voltage
“BAT-UVW” under-voltage warning
“L-SHTCRT” load short-circuit
“L-OVRCRT” load over-current
“DEV-OVRTMP” internal over-temperature
“BAT-OVRTMP” battery over-temperature
“PV-OVP” solar panel over wattage
“PV-OC-OVD” solar panel over-voltage
“PV-REV” solar panel reverse-polarity
“BAT-REV” battery reverse-polarity