Renson Cube - 2. Kit composition

100
Cube
®
EN
ATTENTION:
The ventilation unit has to work continuously.
The Cube can never be turned off. (legal obligation according to NBN D50-001 chapter 4.2. system C)
2 • Kit composition
• 1 x Motor unit EX425CU
• 6 x Cover cap and/or reduction Ø125> Ø80mm
• 1 x adaptor 125-150mm (exhaust)
• 1 x TouchDisplay with CO
2
(230V)
• 1 x XVKS presence detector (white)
• 1 x Manual
• 1 x warranty
Specific measures & safety measures:
• The Cube is built so that it is impossible to come into contact with live components during normal
operation without performing a conscious action.
• You should not be able to touch the ventilator by hand.
A complete duct system has to be connected to the ventilation unit before operating the system.
The minimal length of a duct has to be 1,5m.
• The appliance cannot be opened without proper tools
• The Cube complies with legal demands for electrical appliances.
The following specific safety measures have to be taken into account:
• Make sure that the appliance is disconnected from the power grid when installing or making
changes to the ventilation system.
• Use adequate tools to perform repairs or maintenance on the Cube.
• Only use the appliance for its intended purpose.
• Always wait 30 sec when connecting the ventilation unit to the power grid.