Renson Cube - 9. Controls; 9.1 TouchDisplay

110
Cube
®
EN
9 • Controls
When powering up, a screen appears that allows you to set the day and clock.
Connect only one control with CO
2
sensor.
9.1 • TouchDisplay
9.1.1 • Connecting the TouchDisplay
The ‘day’ lights up.
Use ▼ or ▲ to switch to the relevant day.
Press  to confirm your choice.
After setting the day, you can also set the current hour.
Use ▲ or ▼ to set the hour and minutes.
Press ■ to confirm your choice.
After the time and date, you now need to select the country settings.
Use ▲ or ▼ to switch between different countries and
press ■ to confirm your choice.
1
2
3