Renson Healthbox 3.0 User Manual

99
en
Healthbox
®
3.0
The following specific safety measures must be taken:
• Always ensure that before commencing work activities, the power supply is disconnected by
unplugging the power cord from the wall socket or by switching off the fuse. (ensure that this
has actually happened!)
• Always wait for a minimum of 30 seconds to reconnect the power supply.
• Use appropriate/suitable tools for performing work on mounting the Healthbox 3.0.
• Use the device only for applications for which it was designed, as stated in the manual.
Privacy Statement
If this unit is connected to the internet, it sends various unit information automatically to Renson.
For more information about this data processing, see www.renson.eu/privacy.
PLEASE NOTE:
The fan unit has to function permanently, i.e. the Healthbox 3.0 should never
be turned off. [legal obligation according to NBN D50-001 Chapter 4.2. System C)
If Air quality sensor data is used to display graphics (historical) to the user.
Asan installer you are not automatically entitled to access this sensor data of a
Healthbox 3.0 that you installed, conform General Data Protection Regulation
(GDPR).
If a customer’s Healthbox 3.0 is connected to your own account via a user app,
we recommend that you disconnect this connection to your account (via the user
app or web portal for users) before the customer takes the property into use.

Renson Healthbox 3.0 Specifications

General

Connectivity	Wi-Fi, Bluetooth
Power Supply	230V AC
Color	White
Control	Automatic sensors
Material	Plastic