Reolink Argus 3 Series Operational Instruction

Set up the Camera on PC (Optional)
For better weatherproof performance, always
keep the USB charging port covered with the
rubber plug after charging the battery.
It's recommended to fully charge the battery before mounting the camera outdoors.
Charge the Battery
Charge the battery with the Reolink
Solar Panel (Not included if you
only purchase the camera).
Charge the battery with a
power adapter.
Charging indicator:
Orange LED: Charging
Green LED: Fully charged
Step 1 Download and install the Reolink Client: Go to https://reolink.com > Support > App & Client.
Step 2 Launch the Reolink Client, click the " " button, input the UID code of the camera to add it
and follow the onscreen instructions to finish the initial setup.
Step 3 Launch the Reolink App, and click the “ ” button in the top right corner to add the camera.
Scan the QR code on the device and follow the onscreen instructions to finish the initial setup.
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
EnglishEnglish
5 6

Reolink Argus 3 Series Specifications

General

Weather Resistance	IP65 Weatherproof
Wireless Security	WPA-PSK/WPA2-PSK
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Night Vision	Up to 33 feet (10 meters)
Power Source	Battery/Solar Panel
Battery	5200mAh Rechargeable
Connectivity	2.4 GHz Wi-Fi
Audio	Two-way Audio
Storage	Micro SD Card (up to 128GB) and Cloud Storage
Image Sensor	CMOS Image Sensor
Color Night Vision	Yes
PIR Detection Distance	Up to 33 feet (10 meters)
PIR Detection Angle	100°
Dimensions	121x90x56 mm
Weight	330g (11.6 oz)
Resolution	2K (4MP)
Field of View	120° diagonal