Reolink Duo 2 WiFi User Manual

Set up the Camera on the App
For initial setup, please power on this camera with a DC adapter and also connect
the camera to your router LAN port with an Ethernet cable, and then follow the
steps to set up your camera. Please make sure your camera and your phone are on
the same network.
Step 1. Tap the icon on the top right corner.
Note: If you've enabled the Add Device Automatically option on the App's
Settings page, you can tap this device on the Devices page and turn to Step
Mounting Plate *1
Pack of Screws*1
Screwdriver*1
Mounting Hole Template
*1
Waterproof Lid *1
Power Adapter
12V/2A *1
Antennas *1
4.5m Power Extension
Cable *1

Reolink Duo 2 WiFi Specifications

General

Field of View	180°
Smart Features	Motion detection, Person/Vehicle detection
Weatherproof Rating	IP66
Pan & Tilt	No
Video Codec	H.265
Operating Frequency	2.4 GHz / 5 GHz
Wireless Security	WPA-PSK/WPA2-PSK
Connectivity	WiFi
Night Vision	Infrared and Color Night Vision
Audio	Two-way audio
Power Source	DC 12V/1A
Image Sensor	1/2.7" CMOS
Video Resolution	4K
Digital Zoom	16x
Frame Rate	25 fps
Wireless Standard	IEEE 802.11 a/b/g/n
Storage	MicroSD card (up to 256GB), Reolink Cloud