To Next PageTo Next PageTo Previous PageTo Previous Page
Need help?Do you have a question about the Reolink E1 Zoom and is the answer not in the manual?
General| Sensor type | CMOS |
|---|---|
| Number of sensors | 1 |
| Optical sensor size | 1/2.7 \ |
| Total megapixels | 5 MP |
| Maximum resolution | 2560 x 1920 pixels |
| Video compression formats | H.264 |
| Optical zoom | 3 x |
| Zoom capability | Yes |
| Focal length range | 2.8-8 mm |
| Maximum aperture number | 1.6 |
| Type | IP security camera |
| Placement supported | Indoor |
| Connectivity technology | Wireless |
| Pan range | 0 - 355 ° |
| Tilt angle range | 0 - 50 ° |
| Minimum illumination | 0 lx |
| LED type | IR |
| Infra-red wavelength | 850 nm |
| Night vision distance | 12 m |
| Number of illumination LEDs | 10 |
| DC output current | 1 A |
| DC output voltage | 5 |
| Power source type | DC |
| Compatible memory cards | MicroSD (TransFlash) |
| Audio system | 2-way |
| Bluetooth | No |
| Number of users | 20 user(s) |
| Networking standards | IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Supported network protocols | HTTPS, SSL, TCP/IP, UDP, HTTP, IPv4, UPnP, RTSP, RTMP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P |
| Security algorithms | WPA-PSK, WPA2-PSK |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | -10 - 55 °C |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 20 - 85 % |
| Form factor | - |
| Mounting type | Ceiling/wall |
| Product color | White |
Weight and Dimensions| Height | 111 mm |
|---|---|
| Weight | 250 g |
| Diameter | 80 mm |
Step-by-step guide for initial camera setup using the Reolink App without Ethernet.
Guide for initial camera setup using Ethernet and the Reolink App.
Instructions for mounting E1, E1 Pro, and E1 Zoom camera models.
Specific instructions for mounting the E1 Outdoor camera for outdoor use.
Steps to mount the Reolink Lumus camera to walls or ceilings.
Instructions for installing bullet-style Reolink cameras.
Steps for installing dome-style Reolink cameras.
Explains how motion detection works and its working principle.
How to create a zone to exclude areas from receiving alerts.
Setting sensitivity levels for motion and smart detection.
Enabling push notifications to your mobile phone for motion.
Setting up email alerts with text or live image for motion.
Configuring the camera siren to sound on motion detection.
Enabling motion recording to the SD card when motion is detected.
Enabling continuous recording to the SD card using a timer schedule.
Steps to replay recorded videos from the SD card.
How to download recorded videos from the camera to your phone.
Steps to automatically add Reolink devices on the same network.
Scanning the camera's QR code to add it to the app.
Manually adding a camera by entering its unique UID.
Steps to connect the camera to a different Wi-Fi network.
Specifications for compatible SD cards (capacity, speed, format).
Step-by-step guide for inserting an SD card into bullet cameras.
Instructions for inserting an SD card into E1 series cameras.
Setting and changing the camera's access password.
Steps to change the device password via the Reolink App.
How to update the camera's firmware via the Reolink App.
Solutions for problems like camera not powering on or connection failures.
Steps to resolve issues when the camera does not start up.
Steps to resolve Wi-Fi connection issues during initial setup.
Steps to resolve issues when the camera doesn't detect the SD card.
