English English13 14
Specifications
Night Vision: 8 Meters
Day/Night Mode: Auto Switchover
If you fail to upgrade the firmware for the camera, try the following solutions:
• Check out the current camera firmware and see if it is the latest one.
• Make sure that you download the correct firmware from Download Center.
• Make sure that your PC is working on a stable network.
If these won’t work, contact Reolink Support https://support.reolink.com/.
Hardware Features
Failed to Upgrade the Firmware
Operating Temperature: -10°C to 55°C (14°F to 131°F)
Operating Humidity: 10%-90%
For more specifications, visit https://reolink.com/.
General
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
To Next Page
Loading...
Need help?
General
