Name: Reolink RLC-410W
Brand: Reolink
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Reolink Wireless Camera

User Manual

2. Setup and Installation

Set up the Camera

Set up the Camera Without Ethernet port

Please follow the steps below to do initial setup for the WiFi cameras without an

Ethernet port via the Reolink App.

1. Connect the power adapter to the camera and wait for it starting up. After

hearing a startup sound, you will hear repeated Ding sounds or "Please run Reolink

App, add the camera and set it up", which means you can scan the QR code on the

camera and start the setup process.

Note:

If you are not sure whether you hear the right sound, you may tap "Demo" to hear

the sample sound. If you couldn't hear the repeated Ding sounds, please reset your

camera.

2. Tap on the icon in the top right corner to start the initial setup.

Other manuals for Reolink RLC-410W

Questions and Answers:

Need help?

Do you have a question about the Reolink RLC-410W and is the answer not in the manual?

General

Type	IP security camera
Antenna type	External
Day/night mode	Yes
Antennas quantity	2
Placement supported	Outdoor
Connectivity technology	Wired & Wireless
Bluetooth	No
Number of users	20 user(s)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Networking standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet interface type	Fast Ethernet
Supported network protocols	HTTPS, SSL, TCP/IP, UDP, UPNP, RTSP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P
Compatible memory cards	MicroSD (TransFlash)
Ethernet LAN (RJ-45) ports	1
Form factor	Bullet
Mounting type	Ceiling/wall
Product color	White
Protection features	Waterproof
International Protection (IP) code	IP66
Cables included	LAN (RJ-45)
Sensor type	CMOS
Optical sensor size	1/2.7 \
Fixed focal length	4 mm
Total megapixels	4 MP
Maximum resolution	2560 x 1440 pixels
Video compression formats	H.264
Noise reduction technology	3D noise reduction
Supported graphics resolutions	640 x 480 (VGA), 2048 x 1536 (QXGA), 2304 x 1296, 2560 x 1440
Minimum illumination	0 lx
LED type	IR
Infra-red wavelength	850 nm
Night vision distance	30 m
Number of illumination LEDs	18
Mobile operating systems supported	Android, iOS
Security algorithms	WPA-PSK, WPA2-PSK
DC output voltage	12
Power source type	DC
Power consumption (max)	8 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %