Step 1 Drill two holes on the
wall according to the mounting
hole template.
Step 2 Insert the two plastic
anchors into the holes.
Step 3 Secure the base unit in
place by tightening the screws
into the plastic anchors.
Step 4 Align the camera with the
bracket and turn the camera unit
clockwise to lock it in position.
NOTES:
1. To remove it from the wall, turn
the camera anticlockwise.
2. In case your camera is mounted
upside down, its picture shall be
rotated as well. Please go to Device
Settings -> Display on Reolink
App/Client and click Rotation to
adjust the image.
To Next Page
Loading...
