Reolink Wireless Camera
User Manual
Warm Tips
The Wi-Fi signal strength of wireless cameras can be interfered with by numerous
factors, such as other Wi-Fi networks around, the distance from the router/hot spot,
walls/obstacles in between, transmitting power of the router/extender, etc.
Make sure that the wireless signal is three bars or at least two bars. One bar signal
is too weak to establish a stable connection.
If the Wi-Fi signal strength is low/weak, you may refer to the following guides to
improve the Wi-Fi signal strength of the wireless camera.
·Shorten the distance between your wireless camera and the router.
·Change the wireless channel on your router to avoid interference from Wi-Fi
networks around.
·Keep the wireless camera away from appliances or electronic devices like a
microwave, computer, wireless router, etc.
·Install the wireless camera to somewhere with fewer walls and obstacles in
between with the router.
·Fasten the antennas on the wireless camera.
·Change a router which has higher wireless transmitting power.
·Install a Wi-Fi extender.
FTP Settings
For cameras that support FTP, you can set up FTP settings for the camera to
upload pictures or videos to the FTP server.
Step 1. Go to camera settings, on Advanced > FTP Upload page, enable FTP
Upload option.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
