Reolink RLC-510WA - Set up Motion Recording

Reolink Wireless Camera
User Manual
30
2. Tap Night Mode to set it as Auto. In this way, when a motion is detected during
night time, it’ll automatically turn on the spotlight.
Set up Motion Recording
When the camera detects a motion, it can record and save motion recordings to
the SD card automatically. You need to install an SD card to the camera, refer to
the part of SD Card Storage in Chapter 7 for choosing the correct SD card and learn
how to insert the SD card.
Set up Motion Recording
1. Tap on . Then tap on Camera Recording, tap again to enable it.