To Next PageTo Next PageTo Previous PageTo Previous Page
Need help?Do you have a question about the Reolink RLC-811A and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| Placement supported | Outdoor |
| Connectivity technology | Wired |
| Infrared (IR) cut-off filter | Yes |
| Built-in HDD | No |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 256 GB |
| Form factor | Bullet |
| Mounting type | Ceiling/wall |
| Product color | White |
| Protection features | Waterproof |
| International Protection (IP) code | IP66 |
| DC output current | 1 A |
| DC output voltage | 12 |
| Power source type | DC, PoE |
| Power consumption (max) | 12 W |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Number of users | 20 user(s) |
| User access level | Administrator, User |
| Networking standards | IEEE 802.3af |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | HTTPS, SSL, TCP/IP, UDP, HTTP, IPv4, UPnP, RTSP, RTMP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P |
| Ethernet LAN (RJ-45) ports | 1 |
| Mobile operating systems supported | Android, iOS |
| Audio system | 2-way |
| Total megapixels | 8 MP |
| Maximum resolution | 3840 x 2160 pixels |
| Video compression formats | H.265 |
| LED type | IR |
| Infra-red wavelength | 850 nm |
| Night vision distance | 30 m |
| Number of illumination LEDs | 4 |
| Sensor type | CMOS |
| Optical sensor size | 1/2.8 \ |
| Optical zoom | 5 x |
Weight and Dimensions| Depth | 72 mm |
|---|---|
| Width | 80 mm |
| Length | 238 mm |
| Weight | 838 g |
Instructions for setting up the camera using a smartphone app, including downloading and scanning.
Instructions for setting up the camera using the Reolink Client software on a PC, with download path provided.
Provides advice for optimal camera placement, lens cleaning, and weather resistance for proper installation.
Solutions for when the camera is not powering on, including checking power sources and cables.
Troubleshooting steps for infrared LEDs not working, including settings, firmware, and factory reset.
Details on the camera's hardware capabilities, including night vision range and day/night mode.
General specifications of the camera, including operating temperature, humidity, and ingress protection.
Statement regarding compliance with FCC Rules, including conditions for interference and operation.
Declaration of conformity with essential requirements of EU Directive 2014/30/EU.
Guidance on proper disposal of the product to prevent environmental harm, as per EU regulations.
