EasyManuals Logo

Reolink RLC-811A User Manual

Reolink RLC-811A
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Camera is not Powering On
If your camera is not powering on, please try the following solutions:
• Make sure your camera is powered properly. The PoE camera should
be powered by a PoE switch/injector, the Reolink NVR or a 12V
power adapter.
• If the camera is connected to a PoE device as listed above, connect
the camera to another PoE port and see if the camera will power on.
• Try again with another Ethernet cable.
If these won’t work, contact Reolink Support https://support.reolink.com/.
Troubleshooting
Infrared LEDs Stop Working
If the Infrared LEDs of your camera stop working, please try the
following solutions:
• Enable infrared lights on Device Settings page via Reolink App/Client.
• Check if the Day/Night mode is enabled and set up auto infrared lights
at night on Live View page via Reolink App/Client.
• Upgrade the firmware of your camera to the latest version.
• Restore the camera to factory settings and check out the infrared light
settings again.
NOTE: If your camera has another mount without the adjusting knob,
please loosen the adjusting screw with the provided hex key and turn the
camera as shown below to adjust the angle.
12English
11 English
5
90°
360°

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Reolink RLC-811A and is the answer not in the manual?

Reolink RLC-811A Specifications

General IconGeneral
TypeIP security camera
Placement supportedOutdoor
Connectivity technologyWired
Infrared (IR) cut-off filterYes
Built-in HDDNo
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size256 GB
Form factorBullet
Mounting typeCeiling/wall
Product colorWhite
Protection featuresWaterproof
International Protection (IP) codeIP66
DC output current1 A
DC output voltage12
Power source typeDC, PoE
Power consumption (max)12 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Number of users20 user(s)
User access levelAdministrator, User
Networking standardsIEEE 802.3af
Ethernet interface typeFast Ethernet
Supported network protocolsHTTPS, SSL, TCP/IP, UDP, HTTP, IPv4, UPnP, RTSP, RTMP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P
Ethernet LAN (RJ-45) ports1
Mobile operating systems supportedAndroid, iOS
Audio system2-way
Total megapixels8 MP
Maximum resolution3840 x 2160 pixels
Video compression formatsH.265
LED typeIR
Infra-red wavelength850 nm
Night vision distance30 m
Number of illumination LEDs4
Sensor typeCMOS
Optical sensor size1/2.8 \
Optical zoom5 x
Weight and Dimensions IconWeight and Dimensions
Depth72 mm
Width80 mm
Length238 mm
Weight838 g

Related product manuals