TROUBLESHOOTING
IF THE ARES ATTACHMENT IS NOT FUNCTIONING SMOOTHLY. PERFORM
THE FOLLOWING.
1.
2.
3.
DO NOT APPLY ANY FORCE TO ANY ARES COMPONENTS, UPRIGHTS, OR
CROSSMEMBERS. DOING SO MAY CAUSE MISALIGNMENT. PLACING THE
PIN IN THE BOTTOM OF THE WEIGHT STACK WILL HELP PULL ALL
COMPONENTS INTO PLACE WHEN THE BOLTS ARE TIGHTENED.
LOOSEN ALL BOLTS.
PLACE WEIGHT SELECTOR PINS INTO THE BOTTOM PLATE OF THE
WEIGHT STACKS.
RETIGHTEN ALL BOLTS.
To Next Page
Loading...
