Repco RBC25SS3 - SPECIFICATIONS

5
RBC25SS3
RBC5SS3
SPECIFICATIONS
RBC25SS3 RBC5SS3
Charger Type
Intelligent Automatic - 9 Stage
Input Voltage
220-240 VAC 50Hz or 60Hz
Input Current
0.5 A 0.9 A
Nominal Output Voltage
6V 12V 6V 12V
Output Current
1.25 A 1.25 A 2.5 A 2.5 A 2.5 A 5 A
Battery Type
Automotive Lead Acid Type - WET, AGM, GEL, VRLA, CALCIUM*
Battery Voltage
6V 12V 6V 12V
Battery Cells
3 6 3 6
Battery Charger Setting
(Output Voltage)
6V Motorcycle 12V Motorcycle 12V Car 6V Motorcycle 12V Motorcycle 12V Car
Battery Capacity
Automotive (CCA)
50 - 150 90 - 300 180 - 600
Marine (MCA)
70 - 210 125 - 375 250 - 750
Deep Cycle (Ah)
8 - 25 15 - 50 30 - 100
Reserve Capacity (A)
15 - 40 25 - 85 50 - 170
*Suitable for maintenance charging of calcium batteries.
For recovery charging of calcium batteries, use Repco 9 Stage Intelligent Microprocessor Controlled Battery
Chargers: RBC8SS3, RBC16SS3 or RBC25HDSS3.