Repco RBC25SS3 - CHARGE CYCLES OVERVIEW

6
RBC25SS3
RBC5SS3
CHARGE CYCLES
The following tables detail the VOLTAGE (Volts) and CURRENT (Amps) applied to the battery over time. These
different settings and charge values are necessary to achieve maximum battery charge and optimise battery
condition.
The Charge Cycle Table (below) provides the characteristics of each stage in the Charge Cycle.
Amps
15
14
13
12
0
Volts
DesulphationDiagnosis Pre-Charge Soft Start Bulk Charge Absorption Analysis Recondition
(if required)
Maintain
DesulphationDiagnosis Pre-Charge Soft Start Bulk Charge Absorption Analysis Recondition
(if required)
Maintain
100%
75%
50%
25%
0%
Amps
15
14
13
12
0
Volts
DesulphationDiagnosis Pre-Charge Soft Start Bulk Charge Absorption Analysis Recondition
(if required)
Maintain
DesulphationDiagnosis Pre-Charge Soft Start Bulk Charge Absorption Analysis Recondition
(if required)
Maintain
100%
75%
50%
25%
0%