REPLIGEN ACSS-20K User Manual

KrosFlo® TFF System – Auxiliary Scale ACSS-20K
User Guide
21 repligen.com 420-14871-001 Rev. 00
10. Scale Data
Scale data menu, <P8.InFo>, provides information on the weighing device and its program. The
parameters serve informative purposes:
Table 9. Scale Data
Submenu
Description
<8.1.Idb>
Serial number of the scale
<8.2.PurS>
Program version
<8.4.PStP>
Settings printout. Enter the parameter to send scale settings to printer port (all
parameters)
11. Working modes – General information
The scale features the following working modes:
• Weighing
• Parts Counting
• +/- control
• Percent Weighing %
• Peak hold
• Totalizing
• Animal Weighing
11.1 Running working mode
1. Go to the home screen, press key, name of the first available working mode is
displayed.
2. Press key, names of available working modes are displayed successively one by one.
3. Enter selected working mode, by pressing key to confirm.
Note: The weighing device program has been designed to make the scale run, upon restart, with the
latest operated working mode on.
11.2 Working mode local settings
Each working mode features specific (local) functions which enable customize scale operation. To go
to local settings of each working mode, enter <P3.Func> submenu. Some special functions are
available for all working modes, refer to the table below:

REPLIGEN ACSS-20K Specifications

General

Brand	REPLIGEN
Model	ACSS-20K
Category	Scales
Language	English