ResMed H5i Welcome Guide

Filling the water tub
1. Slide the latch and lift open the flip lid.
2. Remove the water tub.
3. Fill the water tub (through the centre hole) with water
up to the maximum water level mark (380 mL).
4. Return the water tub to the H5i.
5. Close the flip lid ensuring that it clicks into place.
1. 2. 3. 4. 5.
3
English

ResMed H5i Specifications

General

Water Capacity	380 mL
Heated Humidification	Yes
Compatibility	ResMed S9 series CPAP machines
Power Source	Integrated with CPAP device
Power Requirements	24V via S9 device