EasyManuals Logo

ResMed S9 Series Welcome Guide

ResMed S9 Series
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
Air filter
Air filter cover
Maintenance checklist
9 Inspect the water tub and flip lid seal for wear and deterioration.
9 Replace the water tub if any component is leaking or has become cracked, cloudy or pitted.
9 Replace the flip lid seal if cracked or torn.
9 Clean white powder deposits in the water tub by using a solution of one part household vinegar to 10
parts water.
Reassembling and filling the water tub
1. Place the tub lid back onto the base.
2. Clip all four side latches.
3. Fill the water tub with distilled or deionized water up to the maximum water level mark.
4. Return the water tub to the H5i.
5. Close the flip lid ensuring that it clicks into place.
Replacing the air filter
Replace the air filter every six months (or more often if necessary).
1. Remove the air filter cover from the back of the S9 device.
2. Remove and discard the old air filter.
3. Insert a new ResMed air filter
ensuring that it is sitting flat in
the air filter cover.
4. Replace the air filter cover.
Notes:
Ensure the air filter and air filter
cover are fitted at all times.
Do not wash the air filter. The air
filter is not washable or reusable.
11
English

Other manuals for ResMed S9 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ResMed S9 Series and is the answer not in the manual?

ResMed S9 Series Specifications

General IconGeneral
Data StorageSD card
Device TypeCPAP Machine
Pressure Range4 to 20 cm H2O
Sound Level24 dB
Power Supply100-240V AC, 50/60Hz
Therapy ModesCPAP, VPAP ST, VPAP Auto
Altitude AdjustmentYes
Operating Temperature+41°F to +95°F (+5°C to +35°C)
Operating Humidity10% to 95% non-condensing
AC Voltage100-240V AC
Humidifieroptional
RampYes

Related product manuals