ResMed Swift LT User Manual

7
English
Insert elbow into frame. Align pillows with frame. Push pillows firmly into
frame. Ensure top and
bottom retention tabs slot
into place.
4
5
Check positioning markers
on pillows and headgear
are on the same side.
Slide left and right headgear stability arms onto frame.
Ensure inner wall of pillows is in correct position.
If not, squeeze pillow sides to release inner walls.
Reassembling the headgear
Swift LT
B
A
A
B
1
2
3
Reassembling your Swift LT for Her
Lay out the headgear as
shown, writing facing
upwards.
(A) Thread the top straps
through the top buckle,
then (B) back over to
secure.
(A) Thread both backstraps
through the back buckle
(Velcro™ facing outwards),
then (B) fold back over to
secure.

ResMed Swift LT Specifications

General

Brand	ResMed
Model	Swift LT
Category	Medical Equipment
Language	English