en
23
InstallationIndications, functions and optionsMessages Commissioning Operation and function
Unit
UNIT
Temperature unit selection
Selection: °F, °C
Factory setting: °C
In this adjustment channel, the display unit for temperatures and temperature differ-
ences can be selected. The unit can be switched between °C / K and °F / °Ra during
operation.
Temperatures and temperature differences in °F and °Ra are displayed without
units. If the indication is set to °C, the units are displayed with the values.
Reset
RESE
Reset function
By means of the reset function, all adjustments can be set back to their factory
settings.
Î In order to carry out a reset, press button 3
All adjustments that have previously been made will be lost! For this reason, a secu-
rity enquiry will appear after the reset function has been selected.
Only conrm the security enquiry if you are sure you want to set back all adjust-
ment to the factory setting.
Security enquiry
Î In order to conrm the security enquiry, press button 3
Note
After a reset, the commissioning menu will start again (see page 11).
To Next Page
Loading...