ReSound ENZO 3D - Operation of Hearing Aid; Program Button

12
7.2 Operation of hearing aid
7.2.1 Program button
Your hearing aid has a push button that allows you to select from up to
four dierent listening programs.
The list on page 2 tells which programs have been enabled.
1. Push the button to change program
2. You will then hear one or more beeps. The number of beeps indi-
cates which program you have selected (one beep = program one,
two beeps = program two, etc.)
You can also change programs from some of ReSound’s handheld wire-
less accessories and smartphone apps.
i
NOTE: If your hearing aids have Synchronized Push Button enabled, changing program on one
hearing aid automatically repeats in the second hearing aid. A beep in both hearing aids follows
each adjustment.
NOTE: When you turn the hearing aids o and then back on, they always return to program one
and pre-set volume.
Program button
400738011US-17.07-Rev.B.indd 12 03-07-2017 13:51:10